Lork Industrias

General Information

PVDF is a semi-crystalline industrial thermoplastic can be melt processed. It has good chemical and thermal resistance (although not as good as PTFE), as well as good abrasion and radiation resistance. It is slightly more rigid and harder than most fluoropolymers( melt-processable), but shows dielectric losses. It can be injection-moulded.


-60ºC +150ºC


1,78 gr/cm3

  • Excellent chemical resistance
  • Higher mechanical resistance than PTFE
  • Good dimensional stability (similar to POM)
  • Excellent resistance to UV radiation
  • Resistance to corrosion
  • Physiologically inert
  • Low flammability

It is used to make components in pumps, gears, pipes and fittings, tanks ( particularly in the Chemical Industry), bearings, cable insulation, etc

PVDF Thickness mm Size mm
Sheet from 5 to 80 mm 300 x 3000 500 x 3000
Sheet 100 mm 300 x 3000 -

For further information go to the Download section

PVDF ø length
Extruded Rod from ø 20 to 250 mm 1.000 mm 2.000 mm 3.000 mm

For further information go to the Download section

Fichas t�cnicas
Formats and weights